Air conditioning
in Riverside
A 30 square metre living room in Riverside needs about 3.06kW, against 3.37kW for the same room in Claremont, because Riverside peaks at 28.8°C where Claremont hits 30.6°C. Installed prices here run $1,550–$3,900 for splits.
Get Riverside quotes
Up to 3 licensed installers who work your postcode. Free, no obligation.
Why Riverside is different
Sizing advice written for "Hobart" is written for an average that barely exists. Riverside accumulates 1.7 cooling degree days a year and clears 35°C about 0.1 days. Claremont, across Hobart, accumulates 6.8 and clears 35°C about 2.2 days — roughly a 4 times lighter cooling load. That is why the same room needs a different size unit depending which suburb it sits in, and why a number quoted for the metro average will be wrong for most addresses in it.
What size you need in Riverside
| Room | Approx size | Cooling needed | Unit to look for |
|---|---|---|---|
| Bedroom | 12m² | 1.22kW | 2kW |
| Large bedroom or study | 18m² | 1.84kW | 2kW |
| Small living area | 25m² | 2.55kW | 2.5kW |
| Living room | 30m² | 3.06kW | 3.5kW |
| Open-plan living and dining | 45m² | 4.59kW | 4.2kW |
| Large open plan | 60m² | 6.12kW | 6kW |
Sizing follows the design criterion AIRAH uses in its FairAir calculator: the 3pm outdoor temperature exceeded on no more than 10 days a year. We compute that figure for each suburb from Bureau of Meteorology daily records, then split the cooling load into a component that scales with how far the design temperature sits above 24C and a component from sun and internal heat that barely varies by location. That 50/50 split is our assumption, not AIRAH's. Treat the result as a starting point for a quote, not a substitute for an installer measuring your rooms.
What it costs to run here
Riverside sits in the TasNetworks network area, where a residential flat rate currently runs about 25.41c per kilowatt hour (Aurora Energy Residential Flat rate with Off-Peak option). On that rate, a typical 3.5kW split system used normally costs roughly $29 a year in cooling, against about $8 for the identical unit in Claremont.
That figure comes from the energy rating scheme's own registered consumption figures, measured across three Australian reference climates and fitted to Riverside's 1.7 cooling degree days: about 111.4 kilowatt hours a year regardless of climate, plus 1.16 per degree day, then charged at the local tariff. The fixed part matters, because a running air conditioner draws power for standby and part-load cycling even where there is barely any cooling to do — which is why the mildest suburbs still cost something rather than nothing.
On a time-of-use plan in this network, electricity between 07:00 to 09:59 costs about 32.9c against 15.47c off-peak. Cooling the house hard through that window is where summer bills actually get away from people. Pre-cooling before it starts costs noticeably less.
What changes a quote in Riverside
You probably need less than you think
Riverside accumulates only 1.7 cooling degree days a year and clears 35°C about 0.1 days. Oversizing is the common and expensive mistake here: too much capacity short-cycles, dehumidifies poorly and costs more upfront and to run. If an installer quotes a size up without measuring the room, ask them to justify it.
Winter matters as much as summer
With 1893 heating degree days and July mornings averaging 2.6°C, a reverse-cycle system in Riverside earns its keep for heating at least as much as cooling. Ask for the heating output at low ambient temperature rather than the nominal kW, because that figure is what determines whether it copes on the coldest mornings.
Ducted is genuinely viable here
81.6% of Riverside dwellings are separate houses, most with accessible roof space, which makes ducted a real option rather than a stretch. The check that matters is roof cavity height and insulation condition, and any installer can confirm both in a five-minute inspection before quoting.
Established housing, check the switchboard
Riverside has a median age of 41 and correspondingly older housing stock. The thing that catches people out is electrical: an older switchboard may not have a spare circuit for a large system, and that upgrade is legitimate money rather than an upsell. Ask for it to be itemised separately in the quote so you can compare like with like.
The peak window costs real money here
On a TasNetworks time-of-use plan, electricity runs about 32.9 cents during the peak window (07:00 to 09:59) against 15.47 cents off-peak, close to double. Cooling the house hard through that window is where summer bills get away from people in Riverside. Pre-cooling before it starts costs noticeably less for the same comfort.
Installed prices
| System | Installed price | Suits |
|---|---|---|
| Small split (2.5kW) | $1,550–$2,450 | Bedrooms and studies |
| Large split (5-7kW) | $2,600–$3,900 | Living areas |
| Ducted, whole home | $11,000–$17,000 | Houses with roof access |
Hobart pricing. See the full Hobart cost guide for a breakdown by job, or the Tasmania rebate guide for discounts that come off these figures.
About Riverside
Around 7,389 people live in Riverside (estimated for 2025), across roughly 20,611 occupied dwellings. The housing mix is 10.2% apartments, 81.6% separate houses and 7.6% semi-detached or townhouses, which is what drives most of the practical differences in getting a system installed here.
Nearby suburbs
Climate, network tariffs and housing stock shift across a metro, so the sizing and running costs on these pages differ from Riverside's.
- Air conditioning in Newnham 3.4km
- Air conditioning in Claremont 153.3km
- Air conditioning in Glenorchy 158.4km
- Air conditioning in Howrah 164.6km
Sources and data
- ABS Census 2021, dwelling structure and medians by postcode
- ABS Regional population 2024-25 (population estimate basis)
- Bureau of Meteorology, Climate Data Online
- Australian Building Codes Board climate zone map
- AIRAH FairAir cooling calculator (design condition methodology)
- Consumer Data Right energy plan data (network and tariffs)
- energyrating.gov.au product database (zoned energy rating data)
Based on Australian Bureau of Statistics data. Source: ABS, Census of Population and Housing 2021 and Regional population 2024-25, licensed under CC BY 4.0. Climate data: Bureau of Meteorology, licensed under CC BY 4.0. Climate zones: Australian Building Codes Board. Tariffs: Consumer Data Right energy plan data. Appliance energy data: energyrating.gov.au (E3 Program).
Population is an estimate derived from the 2021 Census count scaled by regional growth to 2025, not an official count. Climate figures come from LAUNCESTON (TI TREE BEND) (091237). Nearest qualifying station (still reporting, 46.3 yr of record, 99% complete). LAUNCESTON (TI TREE BEND) (091237) is 1.6 km away, 46.4 km from the open coast against the suburb's 46.1 km, at 5 m against the suburb's 31 m. Stations are ranked on distance plus penalties for differing coastal exposure, elevation, NCC climate zone, record length and marine (sand-spit or island) siting.