Get free quotes
Raymond Terrace 2324Climate zone 5 · Essential Energy

Air conditioning
in Raymond Terrace

A 30 square metre living room in Raymond Terrace needs about 4.18kW, against 3.15kW for the same room in Kiama, because Raymond Terrace peaks at 35.4°C where Kiama hits 29.3°C. Installed prices here run $1,350–$3,500 for splits.

Get Raymond Terrace quotes

Up to 3 licensed installers who work your postcode. Free, no obligation.

What do you need quoted?

✓ Licensed & insured · ✓ Free, no-obligation quotes

Daikin · Mitsubishi · Fujitsu · Panasonic · LG + more

Why Raymond Terrace is different

Sizing advice written for "Sydney" is written for an average that barely exists. Raymond Terrace accumulates 93.5 cooling degree days a year and clears 35°C about 12.3 days. Kiama, across Sydney, accumulates 21.5 and clears 35°C about 1.8 days — roughly 4 times the cooling demand. That is why the same room needs a different size unit depending which suburb it sits in, and why a number quoted for the metro average will be wrong for most addresses in it.

What size you need in Raymond Terrace

RoomApprox sizeCooling neededUnit to look for
Bedroom 12m² 1.67kW 2kW
Large bedroom or study 18m² 2.51kW 2.5kW
Small living area 25m² 3.48kW 3.5kW
Living room 30m² 4.18kW 4.2kW
Open-plan living and dining 45m² 6.27kW 6kW
Large open plan 60m² 8.36kW 8kW

Sizing follows the design criterion AIRAH uses in its FairAir calculator: the 3pm outdoor temperature exceeded on no more than 10 days a year. We compute that figure for each suburb from Bureau of Meteorology daily records, then split the cooling load into a component that scales with how far the design temperature sits above 24C and a component from sun and internal heat that barely varies by location. That 50/50 split is our assumption, not AIRAH's. Treat the result as a starting point for a quote, not a substitute for an installer measuring your rooms.

What it costs to run here

Raymond Terrace sits in the Essential Energy network area, where a residential flat rate currently runs about 31.82c per kilowatt hour (ENGIE NSW ENGIE Standing elec). On that rate, a typical 3.5kW split system used normally costs roughly $63 a year in cooling, against about $14 for the identical unit in Kiama.

That figure starts from the appliance's registered energy rating data, then scales it by Raymond Terrace's own cooling degree days against the reference site the rating uses (Richmond RAAF (067105), 113 degree days). Without that adjustment every suburb in the zone would show an identical number, which would tell you nothing.

Watch the peak window.

On a time-of-use plan in this network, electricity between 07:00 to 08:59 costs about 28.03c against 24.96c off-peak. Cooling the house hard through that window is where summer bills actually get away from people. Pre-cooling before it starts costs noticeably less.

Local factors

What changes a quote in Raymond Terrace

You probably need less than you think

Raymond Terrace accumulates only 93.5 cooling degree days a year and clears 35°C about 12.3 days. Oversizing is the common and expensive mistake here: too much capacity short-cycles, dehumidifies poorly and costs more upfront and to run. If an installer quotes a size up without measuring the room, ask them to justify it.

Humidity, not just heat

Raymond Terrace runs a January afternoon dew point around 17°C, which means the machine spends much of its work removing moisture rather than dropping temperature. A slightly larger unit run gently dehumidifies far better than a small one at full tilt, and comfort here depends on that more than on the thermostat reading.

Ducted is genuinely viable here

85.5% of Raymond Terrace dwellings are separate houses, most with accessible roof space, which makes ducted a real option rather than a stretch. The check that matters is roof cavity height and insulation condition, and any installer can confirm both in a five-minute inspection before quoting.

Established housing, check the switchboard

Raymond Terrace has a median age of 47 and correspondingly older housing stock. The thing that catches people out is electrical: an older switchboard may not have a spare circuit for a large system, and that upgrade is legitimate money rather than an upsell. Ask for it to be itemised separately in the quote so you can compare like with like.

Installed prices

SystemInstalled priceSuits
Small split (2.5kW)$1,350–$2,000Bedrooms and studies
Large split (5-7kW)$2,100–$3,500Living areas
Ducted, whole home$6,500–$12,000Houses with roof access

Sydney pricing. See the full Sydney cost guide for a breakdown by job, or the New South Wales rebate guide for discounts that come off these figures.

About Raymond Terrace

Around 14,054 people live in Raymond Terrace (estimated for 2025), across roughly 9,852 occupied dwellings. The housing mix is 1.3% apartments, 85.5% separate houses and 10.5% semi-detached or townhouses, which is what drives most of the practical differences in getting a system installed here.

Nearby suburbs

Climate, network tariffs and housing stock shift across a metro, so the sizing and running costs on these pages differ from Raymond Terrace's.

Sources and data

Based on Australian Bureau of Statistics data. Source: ABS, Census of Population and Housing 2021 and Regional population 2024-25, licensed under CC BY 4.0. Climate data: Bureau of Meteorology, licensed under CC BY 4.0. Climate zones: Australian Building Codes Board. Tariffs: Consumer Data Right energy plan data. Appliance energy data: energyrating.gov.au (E3 Program).

Population is an estimate derived from the 2021 Census count scaled by regional growth to 2025, not an official count. Climate figures come from WILLIAMTOWN RAAF (061078). Nearest qualifying station (still reporting, 76.4 yr of record, 91% complete). WILLIAMTOWN RAAF (061078) is 9.2 km away, 6.4 km from the open coast against the suburb's 13.9 km, at 8 m against the suburb's 7 m. Stations are ranked on distance plus penalties for differing coastal exposure, elevation, NCC climate zone, record length and marine (sand-spit or island) siting.

Air conditioning in Raymond Terrace: questions

What size air conditioner do I need in Raymond Terrace?
For a typical 30 square metre living room in Raymond Terrace, about 4.18kW, which in practice means a 4.2kW unit. Bedrooms usually land around 2kW. That comes from Raymond Terrace's design temperature of 35.4°C, against 29.3°C in Kiama, which is why the same room needs a different size in each. Any installer should still measure the room, since orientation, glazing and insulation move the answer.
What does it cost to run air conditioning in Raymond Terrace?
Roughly $63 a year in cooling for a typical 3.5kW split used normally, on Essential Energy network rates of about 31.82 cents a kilowatt hour. That figure starts from the appliance's registered energy rating and is then scaled by Raymond Terrace's own cooling degree days against the reference site the rating uses, because without that adjustment every suburb in the zone would show an identical number. If you are on a time-of-use plan, the peak window is where summer bills actually get away from people.
Can I get ducted air conditioning in Raymond Terrace?
Usually yes. 85.5% of Raymond Terrace dwellings are separate houses, and most have the roof access ducted needs. The practical checks are cavity height, insulation condition and whether your switchboard can carry the load, all of which an installer confirms on a short site visit before quoting.
When is the cheapest time to install in Raymond Terrace?
Autumn through early spring, before the summer rush. Installers discount to keep crews busy in the quiet months, and the same job carries a premium in the weeks after the first serious heat arrives, when everyone calls at once.

Ready for Raymond Terrace quotes?

Up to 3 licensed installers who work your postcode, one written price each.

✓ Licensed & insured · ✓ Free, no-obligation quotes