Air conditioning
in Griffith
A 30 square metre living room in Griffith needs about 4.92kW, against 3.15kW for the same room in Kiama, because Griffith peaks at 39.8°C where Kiama hits 29.3°C. Installed prices here run $1,350–$3,500 for splits.
Get Griffith quotes
Up to 3 licensed installers who work your postcode. Free, no obligation.
Why Griffith is different
Sizing advice written for "Sydney" is written for an average that barely exists. Griffith accumulates 274.7 cooling degree days a year and clears 35°C about 41.9 days. Kiama, across Sydney, accumulates 21.5 and clears 35°C about 1.8 days — roughly 13 times the cooling demand. That is why the same room needs a different size unit depending which suburb it sits in, and why a number quoted for the metro average will be wrong for most addresses in it.
What size you need in Griffith
| Room | Approx size | Cooling needed | Unit to look for |
|---|---|---|---|
| Bedroom | 12m² | 1.97kW | 2kW |
| Large bedroom or study | 18m² | 2.95kW | 2.5kW |
| Small living area | 25m² | 4.1kW | 4.2kW |
| Living room | 30m² | 4.92kW | 5kW |
| Open-plan living and dining | 45m² | 7.38kW | 7.1kW |
| Large open plan | 60m² | 9.85kW | 10kW |
Sizing follows the design criterion AIRAH uses in its FairAir calculator: the 3pm outdoor temperature exceeded on no more than 10 days a year. We compute that figure for each suburb from Bureau of Meteorology daily records, then split the cooling load into a component that scales with how far the design temperature sits above 24C and a component from sun and internal heat that barely varies by location. That 50/50 split is our assumption, not AIRAH's. Treat the result as a starting point for a quote, not a substitute for an installer measuring your rooms.
What it costs to run here
Griffith sits in the Essential Energy network area, where a residential flat rate currently runs about 31.82c per kilowatt hour (ENGIE NSW ENGIE Standing elec). On that rate, a typical 3.5kW split system used normally costs roughly $186 a year in cooling, against about $14 for the identical unit in Kiama.
That figure starts from the appliance's registered energy rating data, then scales it by Griffith's own cooling degree days against the reference site the rating uses (Richmond RAAF (067105), 113 degree days). Without that adjustment every suburb in the zone would show an identical number, which would tell you nothing.
On a time-of-use plan in this network, electricity between 07:00 to 08:59 costs about 28.03c against 24.96c off-peak. Cooling the house hard through that window is where summer bills actually get away from people. Pre-cooling before it starts costs noticeably less.
What changes a quote in Griffith
Sizing for 39.8°C, not for the average
Griffith reaches 39.8°C on its hottest days and clears 35°C about 41.9 days a year. Every system loses output as the outdoor temperature climbs, so a unit specified against the nominal rating will disappoint exactly when you need it. Ask what the unit actually delivers at 40°C rather than at its test conditions.
Winter matters as much as summer
With 1167 heating degree days and July mornings averaging 3.4°C, a reverse-cycle system in Griffith earns its keep for heating at least as much as cooling. Ask for the heating output at low ambient temperature rather than the nominal kW, because that figure is what determines whether it copes on the coldest mornings.
Ducted is genuinely viable here
83.3% of Griffith dwellings are separate houses, most with accessible roof space, which makes ducted a real option rather than a stretch. The check that matters is roof cavity height and insulation condition, and any installer can confirm both in a five-minute inspection before quoting.
Installed prices
| System | Installed price | Suits |
|---|---|---|
| Small split (2.5kW) | $1,350–$2,000 | Bedrooms and studies |
| Large split (5-7kW) | $2,100–$3,500 | Living areas |
| Ducted, whole home | $6,500–$12,000 | Houses with roof access |
Sydney pricing. See the full Sydney cost guide for a breakdown by job, or the New South Wales rebate guide for discounts that come off these figures.
About Griffith
Around 19,592 people live in Griffith (estimated for 2025), across roughly 8,641 occupied dwellings. The housing mix is 10.4% apartments, 83.3% separate houses and 4.9% semi-detached or townhouses, which is what drives most of the practical differences in getting a system installed here.
Nearby suburbs
Climate, network tariffs and housing stock shift across a metro, so the sizing and running costs on these pages differ from Griffith's.
- Air conditioning in Leeton 43km
- Air conditioning in Kooringal 153.8km
- Air conditioning in Deniliquin 170.5km
- Air conditioning in Young 205.8km
Sources and data
- ABS Census 2021, dwelling structure and medians by postcode
- ABS Regional population 2024-25 (population estimate basis)
- Bureau of Meteorology, Climate Data Online
- Australian Building Codes Board climate zone map
- AIRAH FairAir cooling calculator (design condition methodology)
- Consumer Data Right energy plan data (network and tariffs)
- energyrating.gov.au product database (zoned energy rating data)
Based on Australian Bureau of Statistics data. Source: ABS, Census of Population and Housing 2021 and Regional population 2024-25, licensed under CC BY 4.0. Climate data: Bureau of Meteorology, licensed under CC BY 4.0. Climate zones: Australian Building Codes Board. Tariffs: Consumer Data Right energy plan data. Appliance energy data: energyrating.gov.au (E3 Program).
Population is an estimate derived from the 2021 Census count scaled by regional growth to 2025, not an official count. Climate figures come from GRIFFITH AIRPORT AWS (075041). Nearest qualifying station (still reporting, 51.5 yr of record, 82% complete). GRIFFITH AIRPORT AWS (075041) is 4.5 km away, 410.4 km from the open coast against the suburb's 407.6 km, at 134 m against the suburb's 127 m. Stations are ranked on distance plus penalties for differing coastal exposure, elevation, NCC climate zone, record length and marine (sand-spit or island) siting.